u7cc彩票

冷再生施工和机械租赁业务
筑路架桥,奉献社会;以人为本,不断创新

服务热线

u7cc彩票18264104888

u7cc彩票

首页>>u7cc彩票路面冷再生机构成以及其工作原理

路面冷再生机构成以及其工作原理

来源:http://gongyeliusuan.com/ 日期:2023-07-05 发布人:
路面冷再生机将铣刨料所有开展再次运用,加上其经济发展的处理方法,促使选用泡沫塑料沥青开展冷再生工程施工变成一种开拓性解决方法,做到环境保护而经济发展的功效。下面冷再生机出租厂家为您讲解路面冷再生机构成以及其工作原理。
The pavement cold recycling machine will reuse all milling materials, and its treatment method of economic development will promote the use of foamed plastic asphalt for cold recycling engineering construction to become a pioneering solution to achieve the effect of environmental protection and economic development. Below, the rental manufacturer of the cold recycling machine will explain to you the composition of the road cold recycling mechanism and its working principle.
路面冷再生机构成:
Composition of road surface cold regeneration machine:
路面冷再生机是沥青路面冷再生施工现场的关键机器设备,一般由动力装置、传动装置、工作中设备、喷洒系统软件和控制自动控制系统构成。
The road surface cold recycling machine is a key machine equipment in the construction site of asphalt road surface cold recycling, generally composed of power device, transmission device, working equipment, spraying system software, and automatic control system.
路面冷再生机工作原理:
Working principle of road surface cold regeneration machine:
路面冷再生机往前行驶时,电机转子往上转动铣刨原路面原材料,另外,水根据塑料软管从路面冷再生机联接的洒水车中运输回来,并在路面冷再生机的拌和仓中喷洒。
When the road surface cold regeneration machine moves forward, the motor rotor rotates upwards to mill and plane the raw materials of the original road surface. In addition, water is transported back from the sprinkler connected to the road surface cold regeneration machine through plastic hoses and sprayed in the mixing bin of the road surface cold regeneration machine.
冷再生机出租
水的供气量根据微控制器操纵的水下混凝土系统软件准确操纵,以做到水分含量。铣刨电机转子将水与铣刨料充足拌和。液體增稠剂,比如热沥青(冷再生机内置泡沫塑料沥青聚氨酯发泡设备,可将热沥青加温到160-180°C,与小量水混和聚氨酯发泡)可根据设计方案的喷洒嘴被喷洒到拌和腔;
The water supply volume is accurately controlled by the underwater concrete system software controlled by a microcontroller to achieve moisture content. The rotor of the milling motor thoroughly mixes water with the milling material. Liquid thickeners, such as hot asphalt (the cold recycling machine is equipped with foam plastic asphalt polyurethane foaming equipment, which can heat the hot asphalt to 160-180 ° C and mix it with a small amount of water for polyurethane foaming) can be sprayed to the mixing chamber through the spray nozzle according to the professional design scheme;
粉末状增稠剂如混凝土需按设计方案加上量事前透层在路面冷再生机前的路面上,路面冷再生机将粉末状增稠剂与再生颗粒和水一次性拌和。如遇再造层原配合比欠佳的状况,可在再死前将所缺乏的一部分沥青混合料透层在路面上,根据与废料加工拌和来改进原路面原材料的配合比。
Powder thickener, such as concrete, needs to be pre coated according to the design plan on the road surface in front of the cold recycling machine. The cold recycling machine mixes the powder thickener with recycled particles and water in one go. If the original mix ratio of the reconstructed layer is not good, the missing part of the asphalt mixture can be thoroughly coated on the road surface before it dies again, and the mix ratio of the original road surface raw materials can be improved by processing and mixing with waste materials.
路面冷再生机构成以及其工作原理相关事项就讲解到这里了,希望能够给您好的帮助,更多事项就来我们网站http://gongyeliusuan.com咨询!
That's all for the explanation of the composition and working principle of the road surface cold regeneration mechanism. We hope it can provide you with good help. For more information, please come to our website http://gongyeliusuan.com consulting service

推荐阅读/ Recommended reading

一般来说,长期经受重型交通的路面会出现路基损坏的情况。为了消除这种损坏,需要对整个路面进行结构性维修。路面冷再生机将铣刨料全部进行重新利用,加之其经济的处理方式,使得采用泡沫沥青...

冷再生机租赁:冷再生机辅助液压系统介绍 2024-01-13
路面冷再生机的组成及原理介绍 2024-01-11
路面冷再生机设备的工作原理 2024-01-08
冷再生机是解决道路全深度翻新的平台 2024-01-05

推荐产品/ Recommended products